|
  |
General
Fully designed in dual mono layout with 2 separate power transformers, two totally symmetric circuits and extra power source for control unit.
Classic SRPP amplifying circuit with high resolution and wide dynamic, reflected in frequency response of 10Hz to 100 kHz ±1dB as well as SNR >100dB, with 1x 12AX7 in input stage and 1x 12AT7 in duo-phase stage for each track.
Top-quality components, such as Rubycon filter capacitor, ALPS motor-driven potentiometer, high-level RCA jacks, gold-plated, etc.
2 outputs, no.1 with 20 dB voltage gain, no. 2 with 10 dB voltage gain, for better adoption of different power amplifiers.
1 control output for connection of power amplifiers to remote linkage operation, with special 3 core cable (1x output, 2x input) included in supply.
PHONO preamplifier, installed in separate metal sub box, completely closed, acting as a perfect shielding of the fine and therefore weak
PHONO signals to any circumferential interferences.
Adjustable perfectly to nearly any cartridge type via set of dip switches for voltage gain selection of MM, MC1 (low resistance MC cartridge), MC2 (high resistance MC cartridge) as well as 8 step impedance selection of 100Ω, 300Ω, 1kΩ, 47kΩ and 47PF, 100PF, 150PF and 220PF.
RIM deviation of only 0.2 dB, set of dip switches for cartridge selection and adjustment of impedance at back easily accessible and protected by metal cover. |
|
Pre Amp:
Max Output Voltage:
Voltage Gain:
Frequency Response:
SNR:
Distortion THD:
Input Impedance:
Output Impedance:
Tube Complement:
Dimensions:
Weight:
Phono Stage:
MM:
MC High:
MC Low:
Input Resistance:
Input Capacitance: |
o
30 V
20 dB on Output 1; 10 dB on Output 2
10Hz to 100KHz ± 1 dB
> 100 dB
< 0.02%
100 kΩ
600 Ω
2 x 12AX7; 2x 12AT7
430 x 315 x 110 mm (W x D x H)
10.5 kg
o
70 dB; 5 mV
85 dB; 0.5 – 1.5 mV
95 dB; 0.25 – 0.5 mV
100 Ω, 300 Ω, 1 kΩ, 47 kΩ
47 PF, 100 pF, 150 pF, 220 pF |
