China-HighEnd-HiFi, a subsidiary of Diamond Palace Investments Limited,

Rm. 9, 31/F., China Merchants Tower, Shun Tak Centre, 168 Connaught Road Central, Sheung Wan, Hong Kong,

Phone +852-91042374; Fax +852-25240490; Email chh@china-highend-hifi.com; Web Site http://www.china-highend-hifi.com

Click trade marks for specific brands 

Klicken Sie die Warenzeichen für spezifische Marken

 

Ali     

DOGE

E&T

FORWAR

HAL

Various Products

 

Classic No. 10.0 HighEnd HiFi Stereo Pre Amplifier

Top Class Unit, with Hedphone Amplifier and IR Remote Control, extremely wide Frequency Response,

ideal for SACD 2-Channel-  and Phono Playback

A top-class unit with precise, perfect playback in highest resolution, transparency and dynamic, as well as elegant and polished appearance and qualities far above its price

Also available in US voltage 110V / 60 Hz

Description

No. 10.0 is a transistor pre-amplifier with additional headphone amplification and remote control, based on Classic's patended main amplifying circuit. The build is ultra thin structure with only 45mm in height.

SEPP (pull-push) voltage regulator firstly adopted in China was developed and produced by Yushang Co itself. This voltage regulator features low internal impedance, less ripple and fast response rate , etc. so that it can keep invariable ripple from zero load to full load (<8µV RMS), just like the characteristic of feeding storage battery. Every parameter and sensation of listening all are better than those series or shunt regulators that are commonly used. The regulator’s sampling amplification adopts single operational amplifier in high conversion rate and sampling amplification of 100% for AC/DC. High accuracy components are used for reference voltage.

Unlike those operational amplifiers being commonly used without negative feedback, every part of the headphone amplification consists of discrete components, so it completely eliminates the impact to negative feedback loop, which is caused by the inductance and distributed capacitance at headphone lead and the portion of coil. It can drive moving-coil headphones of 30ohm-300ohm.

No. 10.0 uses R-shaped power transformer, double-sided PCB, gold-plated RCA jackets, FOR AUDIO and WIMA capacitors, ALPS motor potentiometer and other Hi-End components, etc. It is equipped with an output time-lag protection at line output port.

It comes with a fully equipped IR remote control covering the functions volume, stand-by, selection of input channel, and so forth.

The sound characteristic is full and mellow, broad sound field and localization of precision and clarity. It is excellent in combining with Classic's power amplifier No. 8.0b > For more information on No. 8.0b please, click here.

Technical Data

Frequency Response Pre-Amplifier:

Frequency Response Headphone Amplifier:

THD+N) Pre-Amplifier:

THD+N) Headphone Amplifier:

Gain:
S/N Pre-Amplifier:

S/N Headphone Amplifier:

Input Interfaces:
Input Impedance:
Output Interfaces:

Headphone Output Jack

Headphone Impedance:

Remote Control:
Power Voltage:

Static consumption:
Dimensions:
Net Weight:

5Hz-100KHz -3dB (2V RMS)

5Hz-100KHz -3dB (300ohm 15mW)

0.006% (1KHz 2V RMS), 0.006% (10KHz 2V RMS)

0.05% (1KHz 300ohm 15mW)

20dB

90dB (without weight)

98dB (without weight)

RCA, 4 groups

 80 kΩ

RCA, 2 groups

f 6.35mm big three conductor jack

30 - 300 Ω

RC-602, IR

AC 110V±10%, 50-60 Hz or 220V±10%, 50-60 Hz

6W

430x370x45 mm (WxDxH)

2.8Kg

Order Code

Price fob *)

Conditions

Delivery Volume

CL - 10.0 - 220

US$ 265.00 per unit

See under "General Terms for Delivery to NON EU Countries only" (click here on text)

Brand-new, original packing, once opened for check and short test, including the following items:

1 pre-amplifier, 1 power cable, 1 remote control, 1 original operating manual

CL - 10.0 - 110

US$ 265.00 per unit

See under "General Terms for Delivery to NON EU Countries only" (click here on text)

Brand-new, original packing, once opened for check and short test, including the following items:

1 pre-amplifier, 1 power cable, 1 remote control, 1 original operating manual

How to order

Basically you order by  prepayment of item price or items prices for goods you would like to purchase to us. We offer you the following payment methods:

  • PayPal - just click on the PayPal Shopping Basket sign on this page and follow the instructions

  • Credit Card via PayPal - just click on the PayPal Shopping Basket sign on this page and follow the instructions

  • Bank Transfer - follow the instructions for bank transfer as mentioned on this page

  • *) Attention, please! Since freight costs depending on address of destination, freight service chosen and so on may vary from case to case  above price is the article price for delivery free on board in Hong Kong only, meaning it doesn't include any freight costs. To handle this matter after payment of that price via one of our payment methods as shown below, you will receive our email suggesting you various freight services and mentioning their costs to your destination, together with payment instructions and links for execution. You select the freight service  and execute that payment to us additionally. Immediately after we have recognized payment of freight we will go ahead and deliver goods to you.

  • Please, also note, that above price doesn't include any fees, for instance such as custom, VAT and so on, what might occur additionally in your country after goods have arrived there. These costs you would have to pay yourself according to regulations of your country.

Please, note:

Payments via PayPal or Credit Cards practically are in real time mode and for that reason very fast. They also are safe. So, if you want to receive your goods faster you perhaps should prefer these methods. Bank Transfers, depending on country you live will take at least 5 to 7 days or even longer.

< For 220V / 50Hz Version, please click here.

< For 110V / 60Hz Version, please click here.

Instructions for Bank Transfers - please, follow the steps as indicated below.

You can do as follows:

  1. Open your email program by clicking here orders@china-highend-hifi.com

  2. Fill in order code, quantity and price of each item you would like to order

  3. Let your email program open in case you want to toggle to other product pages for additional orders

  4. Fill in the additional orders you might have same way as described under 2.

  5. Add your full name, postal address, country, email address as well as phone and fax numbers if possible

  6. Click the send button on your email program when you have finished and filled in all you selections

  7. After we will send you our banking information as well as information on shipping and shipping costs so that you can arrange bank transfer for your purchase.

Attention, please:

In case your email program should not open when clicking on our link as shown above, please  click here  for viewing all our contact facilities and use one of them shown there.

© Copyright

The above offer regarding design, texts, graphics, photographs, colors and so on is protected by  ©Copyright. Use in any form, also in parts only by third parties not having our approval in written form is prohibited and might be reason for legal action from our side.

En, Non EU

Copyright © 2004 Diamond Palace Investments Limited
Last modified: 10/13/07