Ali     

Description

No.16.6 is an Integrated Tube Hi-Fi Amplifier, newly developed by Beijing Yushang Audio Technology Co., Ltd. with 6550A or KT88 tubes as PP amplification of final stage.

To get lower distortion and better amplitude-frequency and phase-frequency characteristic, its input stage adopts SRPP circuit consisted of 12AT7. The inverter stage works in constant-current source mode of long-tailed inverter circuit consisted of integrated circuit and 12BH7, which has a more excellent characteristic of AC balance than a typical long-tailed inverter circuit has, also can reduce phase distortion. This inverter stage also has an enough up-dynamic margin that can improve overall system’s distortionless output power. Final stage is a power amplifier stage consisted of 6550A or KT88 tubes, which can be converted between ultra linearity and triode amplifying mode. Grid employs the mode of fixed bias.

It is worth specially speaking of its output transformer that we, Yushang Company, newly developed. With output power 65W (30Hz) and primary impedance 4.5KO it perfectly matches with 6550A. Both its synthetic technology parameter and sound quality have proved that it can bear comparison with some nowadays well-known output transformers in the world. Its primary inductance runs up to 210H(4.5KO 50Hz) and it only has a 3.95mH of primary leakage inductance. Primary impedance is exactly flat between 1K—10KHz frequency range and at other frequency range the impedances variation is slight as well. This transformer’s power frequency response is 5Hz-150KHz(-3dB), primary resonance frequency 240KHz and distributed capacitance below 100Pf. To ensure the transformer has both high function and quality, Yushang spares no expense to use the best silicon steel material that is imported from Japanese Nippon Steel, and after being stamped out and tempered by Yushang, its permeability can be 1.9T. So it is impossible for the silicon steel in general use, Z10 Z11, to be a rival to it. All of these make the transformer have many acoustic advantages, such as deep and clarity bass, full and stout mid-rang, and rigorous and spread high frequency

Because No.16.6 was designed rigorously, reasonable settings like terrestrial current distribution, sampling points of loop negative feedback and local negative feedback make the overall system’s open-loop characteristics have a strong performance. Also because the crossfire signal that goes into signal line is well controlled it can eventually perform give out a clear and precise sound quality.

Although its total loop’s negative feedback is 6dB, due to reasonable design the parameters of overall system still keep a quilt high level.

On appearance its design is unique with becoming height. Considering that tubes’ plate current will change within their lifetime, a digital Ia meter is equipped to help users monitor the working mode of the final stage’s tubes. Practice proves that this function is essential for audiophile to have.

The toroidal power transformer uses Nippon silicon steel Z11. No. 16.6 has a high-voltage time-delay circuit for the moment when it is turned on, choking winding, electron filter and remote controller that is shaped from aluminum.

It comes with IR remote control in solid aluminum enclosure.

Technical Data

Output Power:
Frequency Response:
Harmonic Distortion (THD +N):
S/N (without weight):

Input Sensitivity:

Output Impedance:
Tubes:

Remote Control:
Power Voltage:

Power Consumption:
Dimensions:
Net Weight:

 55W RMS in ultra linear mode, 25W RMS in triode mode

5Hz to 88KHz -3dB (8W), 12.5Hz to 80KHz -3dB (55W)

0.21%(1KHz 8W), 0.47%(1KHz 22W), 0.92%(1KHz 55W)

95dB

0.3V RMS

4Ω. 8Ω

4x 6550A / KT88, 2x 4/12BH7EH, 2x 12AT7

IR

AC 110V±10%, 50-60 Hz or 220V±10%, 50-60 Hz

130W (220V)

420 × 337 ×116 mm (W x D x H)

20 kg

Price fob *)

Conditions

CL-16.6-220

US$ 995.00 per unit

See under "General Terms for Delivery to NON EU Countries only" (click here on text)

Brand-new, original packing, once opened for check and short test, including the following items:

1 amplifier, power cable, 1 original operating manual.

CL-16.6-110

US$ 995.00 per unit

See under "General Terms for Delivery to NON EU Countries only" (click here on text)

Brand-new, original packing, once opened for check and short test, including the following items:

1 amplifier, power cable, 1 original operating manual.

How to order

Basically you order by  prepayment of item price or items prices for goods you would like to purchase to us. We offer you the following payment methods:

• PayPal - just click on the PayPal Shopping Basket sign on this page and follow the instructions

• Credit Card via PayPal - just click on the PayPal Shopping Basket sign on this page and follow the instructions

• Bank Transfer - follow the instructions for bank transfer as mentioned on this page

• *) Attention, please! Since freight costs depending on address of destination, freight service chosen and so on may vary from case to case  above price is the article price for delivery free on board in Hong Kong only, meaning it doesn't include any freight costs. To handle this matter after payment of that price via one of our payment methods as shown below, you will receive our email suggesting you various freight services and mentioning their costs to your destination, together with payment instructions and links for execution. You select the freight service  and execute that payment to us additionally. Immediately after we have recognized payment of freight we will go ahead and deliver goods to you.

• Please, also note, that above price doesn't include any fees, for instance such as custom, VAT and so on, what might occur additionally in your country after goods have arrived there. These costs you would have to pay yourself according to regulations of your country.

Please, note:

Payments via PayPal or Credit Cards practically are in real time mode and for that reason very fast. They also are safe. So, if you want to receive your goods faster you perhaps should prefer these methods. Bank Transfers, depending on country you live will take at least 5 to 7 days or even long

Instructions for Bank Transfers - please, follow the steps as indicated below.

You can do as follows:

1. Open your email program by clicking here ► orders@china-highend-hifi.com

2. Fill in order code, quantity and price of each item you would like to order

3. Let your email program open in case you want to toggle to other product pages for additional orders

4. Fill in the additional orders you might have same way as described under 2.

5. Add your full name, postal address, country, email address as well as phone and fax numbers if possible

6. Click the send button on your email program when you have finished and filled in all you selections

7. After we will send you our banking information as well as information on shipping and shipping costs so that you can arrange bank transfer for your purchase.

Attention, please:

In case your email program should not open when clicking on our link as shown above, please  click here  for viewing all our contact facilities and use one of them shown there.

© Copyright

The above offer regarding design, texts, graphics, photographs, colors and so on is protected by  ©Copyright. Use in any form, also in parts only by third parties not having our approval in written form is prohibited and might be reason for legal action from our side.